
Founded
1996
Sanjia Town, Gaoping, Jincheng, Shanxi, China
Founded
1996
Sanjia Town, Gaoping, Jincheng, Shanxi, China
Coking capacity
1.0Mt/a
Energy
To the state grid
560GWh/a
Steam turbine
Employees
750people
Privately owned
District heating in winter
1,500,000m²
via the Gaoping heating utility
Honour or recognition
2005
The only coking-and-power enterprise in mainland China to hold this title
Desulphurisation gypsum
Group cement operations
Four Business Segments
Rooted in China, Serving the World
Shanxi Xinggao Group Sanjia Coking Co., Ltd.
A works built inside a garden, a garden inside the works
A stamp-charging coking producer in Gaoping, Shanxi, supplying foundry coke, blast furnace coke, reductant coke and coke breeze on a stable basis to steel, foundry and ferroalloy customers in Japan, Southeast Asia and China. Export shipments load at Rizhao Port, Shandong.
Group at a Glance
- 1996
- Established
- 1.0Mt/a
- Coking Capacity
- 2plants
- Coking Plants
- 560GWh/a
- Waste-heat Power
Product Range
Foundry coke is the priority development direction of the plant. Normal supply ranges for each product are shown on the product pages.
Foundry CokeCupola furnace foundry workSizing60–90mmView Specification
Blast Furnace CokeBlast furnace ironmakingView Specification
Reductant CokeReductant for ferroalloy smeltingSizing10–30mm / 5–25mmView Specification- Schematic illustration, not an actual product photo.Coke BreezeFuel for sintering and pelletisingSizing<25mmView Specification
Full specification and item-by-item values are available on enquiry.
What Can Be Verified
Each of the following is supported by a certificate, report or third-party document that can be verified independently.
Certified Management Systems
Quality, environmental, occupational health and safety and energy management systems are certified. The certificates carry the CNAS, IQNet and IAF MLA marks and can be verified with the certification body.
Third-party Laboratory
Analyses are issued by an independent laboratory holding CMA and CNAS accreditation. The reports are admissible for trade arbitration and quality dispute review.
Pre-shipment Analysis
A third-party analysis certificate is issued before each shipment. SGS inspection is also accepted; scope and cost sharing are agreed per order.
Resource Recycling and Emissions
No chemical products are extracted. Waste heat is converted to power exported to the state grid and to district heating in winter; desulphurisation gypsum is reused within the cement business of the group. The process generates no coking wastewater and holds no crude benzene inventory.
One-stop control, one site
From coal blending to loading, all within our own works
The plant operates stamp-charging ovens with full conversion of waste heat. Coal is compacted into a single cake before charging, and no chemical products are extracted. Every step from coal blending to loading is controlled within one site.
Step01
Coal Blending
Coal is blended to the target specification on a base of local anthracite. The raw material yard is fully enclosed.
See it on siteStep02
Stamping
The blend is compacted into a single coal cake at raised bulk density, yielding a dense coke with few fissures.
See it on siteStep03
Coking
The cake is charged into the carbonisation chamber. The gas circuit runs under negative pressure throughout, containing fugitive emissions.
See it on siteStep04
Quenching
Coke is pushed, quenched and moved to the wharf to cool. The hot flue gas is routed to waste-heat boilers for power generation.
See it on siteStep05
Screening
Coke is screened and graded to the sizing required by the order, as an existing process step.
See it on siteStep06
Loading and Despatch
Despatch follows issue of the third-party analysis certificate. Cargo moves inland to the export port for loading.
No site photograph yet
Export PortRizhao Port, Shandong





Enquiries
To allow us to quote, please include the following in your enquiry. We reply in writing and attach the full specification together with a sample third-party analysis certificate.
- Product and grade
- Sizing requirement
- Volume and delivery schedule
- Destination port and Incoterms
- Payment terms
- Inspection and acceptance requirements
Ting ChiuInternational Sales Director
ting@xinggao-group.com
+86 137 5360 4112
+886 917 577 101
Chinese · English · Japanese

